Euro Manufacturing and Marketing Ltd  UK Manufacturers of  Battery Management Systems,  DC-DC Voltage Converters and DC-DC Battery Chargers

This Speed Switch offers a direct equivalent to the LS – 20 – A (3177)


The Unit was designed to switch selected equipment (such as Reversing Cameras) Off at a specific Road Speed.


The switching off speed is set by selecting a combination of up to 6 switches, giving 64 options between the limits of 2.5km/h (1.6mph) and 102.5km/h (64mph).


The switching off speed can be Factory set or adjusted during installation.


The output on this unit is normally on and switches off at the set speed, it is capable of switching 10A.


The tri state Override input can control the output as follows:


Open = normal operation

Switch to positive = output off

Switch to ground = output on

Output Current

10A

Switch Off Delay (Speed Increasing)

1 second

Switch On Delay (Speed Decreasing)

< 12ms

Switch point Setting (See Table)

6 Way Switch

(64 Combinations)

Pulse Input

V low < 1.5V

V high > 5.5V

Pulse Duration > 1.5ms

Override Input Resistance

> 5k to ground

Override Input

Open

Operation normal

< 1V

Output On

> 4.5V

Output Off

Case Style

Din Pack, Vertical bracket

Dimensions

94 x 61 x 45 mm

Weight

85g

Fixing

1 x 6.3mm Hole

Case Material

Black ABS

Bracket Material

Aluminium Alloy

 Note: All road speeds assume 4 pulses per metre


Note: Pin 1 and Pin 6 should be wired directly to the appropriate Pins on the Tachograph as indicated.


For example on the DTCO 1381 Tachograph:

· Pin 1 of Speed Switch to Tachograph Plug B Pin B8

· Pin 6 of Speed Switch to Tachograph Plug A Pin A6


Setting Information

E1047 12v + 24v Digital Speed Switch

E1047 12V / 24V Digital Speed Switch

Cross Reference LS – 20 – A (3177)